Glitter Resin Tumbler with Cricut Vinyl DIY
Shiny asphalt drum with DIY jack vinyl
are you still crazy This is my first time and I love strong flash! Make a shiny tambourine perfect as a gift...for school teachers, friends or family.
Personalize with your favorite color or your name and the luminosity. Drinking plenty of water every day is a good reminder...or a good drink on a cold morning.
It shines like a lamp in the sun! Note: This dishwasher cannot be washed in the sink... but I do not wash stainless steel sinks in the sink. Hand wash only for safety reasons. Begin!
Stock needed for Glitter Resin Tumbler
Chrome vinyl cut by Cricut Maker
ribbon
Massage with alcohol
sandpaper
Cup spatula (or double! )
Step 1 rope massage peeling with alcohol!
Start by cleaning the bottle with alcohol.
Step 2 Tubing tape!
Then glue the top and bottom edges with blue paint.
Step 3 Spark!
Start painting the reflection on the visible drum. Cover the entire lid and let it dry. Then combine some spark plugs with the Modopods and draw them on the template. Then let it dry completely.
Step 4 - Vinyl Creek Cricket!
Use Cricut Maker to cut phrases or names onto metal vinyl or self-adhesive film.
When the coating is completely dry, cover the glass so the bottom is flat and the vinyl is tacky. Apply the cut vinyl to the stem like a glossy tip.
Step 5 Rotate the cup!
Now we need a clutch station to make the glue.
Trophy winners are cheap and well known, so you may have to buy them! But if you want to do it in DIY mode, this is a temporary version.
I used long pins pushed into holes in the cardboard. Then the pond noodles wander over the pigeon.
Step 6: Chew Gum!
Now mix the high-gloss adhesive according to the package instructions.
Mix well in step 2.
Now, using the roller pins, apply the glue to the wood...to the roller. Rotate slowly and continuously for the first 30 minutes.
This is where power generation gets great! If you have a power station, leave it on for 4 hours and keep it on for another 4 hours. Then change the loop and leave it on overnight, straight on for 24 hours.
After 30 minutes, use a straw to remove the foam.
Then rotate the cup 1/4 turn every minute for the next 30 minutes. Then turn every 1/4 every 2-3 minutes...and keep turning regularly for the next 4-5 hours.
To get another electric spinner, you get rid of all those extra time commitments.
After 5 hours, carefully inspect the glue and see how well prepared it is. If you still feel numb, keep rolling it... otherwise let it dry overnight.
Then leave it overnight. Remove the colored bar the next day.
The tape leaves a clean line, perfect for drinking or removing glue from lips. Resin is food safe so it's not a fact, it's just a matter of convenience.
no longer!
It's difficult to get a glossy photo, but it looks amazing!
Like, pin and share!
And this stunning color splatters on a high gloss tray!
Here are some of the most helpful cricket posts:
Check out this link for more things you can do with your Cricut!
Read this article on 5 ways to make money with Cricut Explore Air 2 with top tips that can be applied to any Cricut electric lawn mower .
This post was originally published in Doodlecraft
