Shabby Chic Rustic Metal Pumpkins DIY

Shabby Chic Rustic Metal Pumpkins DIY:
Prepare your pumpkin for the perfect fall planting. I saw something like that at the door of the hobby; I knew I could recreate some of the things I already had. It adds a fun and luxurious element to our front balcony for a fall break. I like how it turned out.
It is quite easy to cook in one or two hours. The bigger the size, the easier it is to make ... so start with the big ones and move on to the smaller ones Aren't they beautiful to look at?
You will need: (with affiliate link)
Wire tape ( here or here or here )





First open the metal strip and let it sit for a while.
Use a drill to make a hole in the middle of the branch.
Look for the metal around the wood ... let it protrude slightly from the edge. Carefully screw the light stick metal. Save for form.
Use a washer to prevent the screws from going through the metal holes.

The next step is a bit complicated և I didn't get a picture of the process, sorry. Rotate the strip of metal tape around the center of the wood to create a loop.
The metal is soft and easy to fold when needed. I have a piece of metallic tape that I glued to it to make a leaf. Then connect it to a washing machine.
Then use the hot glue gun short stick ... և also և E6000.
Roll a small amount of E6000 glue just below the center of the pole.
Then fill the outer edges with hot glue. The hot glue helps it set up quickly and ensures E6000 durability.
Attach to metal screws և Tape:.
All the pumpkins you want to repeat. It's so beautiful: a broken heart և even more fresh, you can do it yourself.

They are suitable for September-November.
Post Like, Share:

This post was first published on Doodlecraft