DIY Resin Monogram Necklace with Vinyl

Sports Info

7 May, 2022

DIY Resin Monogram Necklace with Vinyl Create an expensive monogrammed necklace in minutes. The perfect handmade gift for someone you love. This necklace is easy to make and a great project if you are new to asphalt. Jewelry is addictive - you love it!

DIY Stick On Vinyl Monogram Necklace

Make an expensive monogram necklace in minutes. The perfect handmade gift for someone you love. This necklace is easy to make and a great project if you are new to asphalt. Jewelry is addictive - you love it!

If you've never tried asphalt, this is a great project to start with. Glue consists of 2 parts that together make a chemical reaction to strengthen it. Reinforced glass, shiny, smooth and crystal clear.

Glue can turn yellow over time, so it's best to use it on black or at least non-white areas. All stickers will turn yellow over time, this brand is unlimited. Just a warning when working with it. Gives a beautiful glossy finish!

I chose "H" for my son, which letter do you prefer?

Find the font with the spelling of your choice. I like the fonts very nice, you can use a permanent marker and write your own, or you can use vinyl and cut it with an electronic cutting machine.

Material for Resin Monogram Necklace

drawing paper

Scissors or round punch

Decorative edge with chain

ETI jewelry glue

Cricket Creator

Mod Podge or Seler

Black vinyl/transfer tape

Asphalt Necklace Monogram Required Scissors Key Required Scissors or Jewelry Circle Basel By ETI Resin Jewelry Necklace Cricut Maker Mod Podge or Black Vinyl Seler / Tretter Transfer

Step 1: Cricut Vinyl

Cut a piece of paper into strips with your fist.

Step 1: Cut out the cricket vinyl or cut a piece of paper to measure the size of the frame with holes.

Then use the Cricut Maker to cut the vinyl to the size of the pendant frame, about 3/4" high.

Use the Cricut Maker to cut the vinyl to your frame size, about 3/4

Then place the transfer tape on the vinyl and transfer the monogram to the album paper.

Use transfer tape to add a vinyl monogram to the picture book.

Step 2: Mod Podge

Next, draw a fashion potion in the frame.

Step 2 Remove mod podge Next, draw mod podge in the frame.

Put the Mod Podge poster and image on the paper. Let it dry completely.

Step 3: Glue on the jewelry

Now read the instructions for jewelry glue. It is important to ensure that the instructions are up to date before applying the glue. This is time consuming and if it is not mixed properly it will not set properly and your project will fail.
OK, read the instructions.

Step 3: Jewelry Glue Now read the instructions for the jewelry glue. It is important to ensure that the instructions are up to date before applying the glue. This is time consuming and if it is not mixed properly it will not set properly and your project will fail. OK, read the instructions.

This frame does not require a lot of bitumen, but mix 1 part asphalt with 1 part hardener and mix for 2 minutes. Pour into the second cup and stir for another minute. This 2-step mixing process is very important for solid asphalt.

Be careful not to overdo it.

Place the dough on a baking sheet and fill the inside with the glue mixture. We sit for 5-10 minutes, and then use a flashlight or heat to open the resulting bubbles. Sitting and staying up all night.

Step 4 Add channel

Use pliers to attach the chain to the edge.

Step 4: Add the chain Use pliers to attach the chain to the frame.

just that! This necklace is ready to wear or display!
I don't wear a lot of jewelry, but I like necklaces. I love the shimmery pieces, the handmade pieces are sparkling and beautiful too!

This starter necklace is easy to make and takes a little time to dry...but it makes a beautiful handmade gift.