Cupcake stand with rustic DIY wooden slices
This rustic wooden cake stand is a lightweight project that takes less than 10 minutes to make. Great for any theme party, big cake, holiday favors or any other fun way to look. I like to do quick and useful things, it will mark both. I look forward to using it soon in a holiday show. Quiet.
I like the look of the village wood, in fact my whole house has been remodeled with good old pine planks. There are so many wooden figures. Feel free to add decorations or personalize your cabin according to the theme of the holiday. I got the stock
from Plaid , all comments are mine.
Necessary accessories.
Large layer of wood (up to 9 inches in diameter)
Small layer of wood (about 7 inches in diameter)
hot glue guns
Adhesive E6000
6 inches of wood (1 inch in diameter)
Start by removing the wrapper from the wood and cutting the lid six inches long.
Use a tape measure or ruler to estimate the center of each piece of wood. Measure straight from one side ያድርጉ Mark the middle. Then measure in the other direction, mark the middle. Then join the 2 dots to get the middle.
Then place an E6000 adhesive sheet between the edges of the wooden lid.
Then apply hot glue about E6000 immediately between the tube and a large piece of wood. The hot glue sticks immediately and the E6000 sticks forever.
Repeat the same process for the other edge of the wood veneer.
Then place the stick as close to the center as possible.
Leave the cup for 4 hours ... or you will find it difficult to use it right away.
Perfect for your favorite cake layers. It contains 6 below and 3 above. But I just put one
on top that sticks to the tape. Suitable for any show.
love to share.
This craft is the editor of the Blitz party. Click the Party Entertainment button to learn more.
