DIY Rural Cake Tray
This is an easy project that takes less than 10 minutes to complete. Ideal for any themed party and great for displaying cakes, souvenirs or any other fun proposal. I like to make things useful and fast by fulfilling these two requirements. Can't wait to use it soon at parties - stay tuned!
I love the rustic look of the wood, in fact all the renovations on my home are done with beautiful aged pine planks. There are so many characters in the tree. So feel free to add decorations to your party theme or even add some color to your stand. I got my
article from Ply , all comments are mine.
Necessary material:
Large wood (up to 9 inches in diameter)
Small wood (about 7 inches in diameter)
hot glue gun
E6000 glue
Wooden base 6 "(1" diameter)
Start by lifting the foil from the wooden planks and cutting the tenons to a length of 15 cm.
Use a tape measure or ruler to find out the location of each piece of wood. Just measure straight on one side and mark the center. Then measure the other direction and mark the center. Then connect the 2 points to get the center.
Then apply a drop of E6000 glue to the center of the cutting board.
Then immediately apply hot glue around the E6000 and press it into the center of a large piece of wood. Hot glue sticks instantly, but the E6000 sticks forever.
Repeat the same procedure for the other end of the stitch.
Then place a piece of wood as close to the center as possible.
Let the cake rest for 4 hours ... even if it is very difficult to use right away!
Perfect for stacking expensive cakes! It can reach 6 below and 3 above. But I
only add one to the oatmeal band! Great for any show!
Like, connect and share!
This craft is part of the Lightning Craft Party Edition! Click the Party Entertainment button to find out more!
